Small Scale Auto FP Analyser (ASTM D3828, D3278, D7236)

Measuring Range for Small Scale Low Temp. model:
Flash Points between 0°C and +135°C
With built in Peltier Cooler (No external cooler required)
Order numbers 104044, 104045, 104042, 104043

Measuring Range for Small Scale Ultra Low Temp. model down to -30C:
Flash Points between -30°C and +135°C
With built in Peltier Cooler and additional liquid circuit for external external cooler to support the Peltier Cooler
For Flash Point 0°C to 135°C: no external cooler required
For Flash Point -20°C to 0°C: external cooler with 80W @ -20°C required
For Flash Point below -20°C: external cooler with 110W @ -40°C required
Order numbers 104040, 104041

Measuring Range for Small Scale High Temp. Model:
Flash Points between 30 to 300°C
Order numbers 104046, 104047, 104048, 104049

Cooling System:
Built in Peltier Cooling system for fast pre cooling and cooling at test end (only for small Scale Low Temp. and Small Scale down to-30C)

Heating System:
Separate heater element allow for fast heating mode Test method or user-defined heat rate from 0.2 to 6 °C/min.

Temperature Measurement:
Pt 100 probe, 10 Calibration Points
Temperature range -50°C to +450°C
Resolution 0.1°C

Ignition Source:
Intelligent Electric Igniter with automatic power management over life time or automatic Gas Ignition with gas flame monitoring
Test Method or user-defined
Test Interval from 0.5 to 5 °C

Barometric Pressure Sensor:
Built in barometric pressure sensor for automatic barometric pressure correction for the Flash Point, Pressure units mbar, hPa, kPa, mmHg or Torr.

Flash Detection System:
Unique Thermal Flash Point Detection which can detect Flash Point of all sample types

User Interface:
7” Colored Touch screen, virtual alpha numeric keypad, Barcode Reader, Language English, German, Spanish, Portuguese, French, Chinese

Result Documentation:
Database for 500 results, 200 products, User defined result reports for printer and LIMs

Printer: Any printer with USB Interface and PCL5 or higher, automatic print out
LIMS interface: Ethernet or RS232, user defined Data String, automatic LIMS transfer
Data Export: USB Memory Stick, Import into Excel
QC-Functions: Automatic QC-sample handling and QC-Chart


SAFETY FEATURES:

Fire Extinguisher:
2 built-in fire sensors for detection of fire or just flash outside of the cup,
Fire extinguishing System with external inert gas supply, Alarm relay to link OptiFlash to a lab alarm system

Safety pre test:
By doing safety pre dip ins the unit can detect high volatile contamination in normally high flash point samples and avoid a risk of fire

Alarm Functions:
Automatic detection of method or safety violations.
User selects test termination or alarm message

Password Protection:
Different Access levels for Operator, Service or Lab Manager

Calibration & Diagnostics:
User defined Calibration Intervals Automatic Diagnostic functions

Options for Small Scale High Temperature:
Fire extinguishing system with ultra fast optical sensor, Gas Ignition system

Options for Small Scale Low Temperature:
Fire extinguishing system with ultra fast optical sensor, OptiFlash Cooling module for external cooling connection, External Cooler for Flash Points down to -20°C with 80W @ -20°C, External Cooler for Flash Points below -20°C with 110W @ -40°C, Gas Ignition System

Accessories: Barcode Reader, Printer


OPERATING REQUIREMENTS

Electrical: 115Vor230VAC ±10% switchable; 50-60Hz, 500W
Ambient Conditions: Temp. max. 10° to 35°C; recommended 15° to 25°C Hum.: 80% rel. at 35°C
Storage temperature: -15 to +55°C
Dimensions: 25 cm x 51 cm x 56 cm (W x D x H)
Weight: 25kg