Flexible Electrochemistry Platform
The ElectroReact platform is an easy-to-use, flexible and robust batch electrochemical platform, offering up to 6 different reaction vessels on a single support plate.
The support plate sits directly on a standard stirrer hotplate, allowing for well mixed and reproducible operation on standard laboratory equipment. Two ports on each reactor allow for flexible configuration - for example running on a Schlenk line for gas sensitive reactions, sampling or additions during the reaction or use with a potentiostat for analytical work.
It can be used with a generic power supply, and is built to handle a huge range of electrodes and standard fittings that are cost effective and widely available.
Starter kit ADS30-SK comes with 1 holding plate, 2x 20mL glass cells with cap and connectior, 4 electrode holders, O-rings, plugs and alligator clips.
Available in other configurations with E.g. 6 glass cells or smaller 5mL volume cells.
A publication explaining the technology is available via the button 'download PDF' below.
With standard kits, each glass cell is 20 mL volume. Recommended minimum solution volume of 8 mL to allow immersion of the 5 cm electrodes by 1 cm. Maximum solution volume to be used of 17.5 mL.
We offer a range of power supply options to enable users to select according to their requirements (we can advise you on which will best suit).
Max fluid volume: 20ml reactor
Volume below electrodes (stirrer): 2.5ml
Diameter (external with cap): 40 mm
Height (with cap): 80 mm
Internal reactor diameter: 24 mm
Entry ports: 2 x 1/4-28 flat bottomed ports per module to take standard flangeless fittings
Material reactor body: glass
Material Electrode carrier: PEEK
Material Internal electrode connection: Stainless steel
Fittings
Recommended fittings: PEEK nut and ETFE ferrule for 1/16" OD tubing; ETFE blanking nut; Unions; Luer (syringe) connectors; barb fittings
Recommended tubing: PTFE 1/16" OD; 1/32" ID
Recommended stirrer bar: PTFE cross design
Thermal base plate
Dimensions: 180mm diameter. Supplied alignment pins suit hotplates 135mm or 145mm, optional pins available for square bases, or can be positioned on any flat surface without pins. Base accepts both reactor sizes with sleeves for 5ml reactor
Material: Anodized aluminium