Infrared temperature calibrator
Aim – shoot – test
For the calibration of infrared thermometers above ambient temperature, the model CTI5000 is suitable up to 500 °C (932 °F). Due to its stability, the new portable infrared calibrator is particularly suited to the calibration of infrared hand-held thermometers.
The black body has a large diameter so that a wide variety of infrared thermometers can be tested, no matter which lenses are tted.
The emissivity is xed at 0.95 and the temperature can be controlled in steps of 0.1 °C.
To check the black body, there is a bore located directly behind the surface so that the measurement can be made with contact and the quality monitored.
APPLICATIONS:
Testing and calibration of non-contact temperature measuring instruments
Heating source for on-site laboratories for the calibration of infrared thermometers
Also suitable for on-site calibration
Stability: ±0.1 K to 100 °C ; ±0.2 K to 350 °C; ±0.4 K to 500 °C
Resolution: 0.1 K
Heating time: 30 min from Tamb. to 500 °C
Cooling time: 40 min from 500 °C to 100 °C (from 932 °F to 212 °F)
Stabilisation time: approx. 15 ... 20 min
Emissivity: 0.95
Diameter of the measuring surface: 57mm
Relative humidity: 35 ... 85 % r. h. (non-condensing)
Operating temperature: 5 ...35 °C
Power: AC 230 V, 50/60 Hz
Power consumption: 275VA