Art nr FP-PMCC-6 ------------------

Secondary working reference standard / 239.0 °C / Min. Oil

Paragon ISO 17025 / ISO Guide 34 certified PMCC Flash Point Standards are tested and certified in accordance with ASTM D93 'Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester - Procedure A'. Procedure A is applicable to distillate fuels - diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils. These UKAS certified standards are specifically designed to be used for regular instrument performance checks. Packed uniquely in 3 x 80mL 'single shot' bottles assuring the highest level of sample integrity. An economical, time saving addition to any laboratory concerned with the generation of valid analytical test data. Typically used in, but not limited to, the analysis of petroleum products with flash points above 40°C and below 360°C.

Secondary Working Standards are designed to be used on a frequent basis in order to verify test equipment functionality on an on-going basis. They are suitable for monitoring the equipment between annual verification checks as specified in ASTM D 92 or ASTM D 93.

There are no technical details available.

DEN150-02 Paragon 150°C -- 0.7795g/mL -- 60 mL

DEN20-03 Paragon 20°C -- 0.7788g/mL -- 60 mL

CL080 Paragon Cold Crank Simulator Type CL080 (CL08) -- 500mL

CL110 Paragon Cold Crank Simulator Type CL110 (CL11) -- 500mL

CL120 Paragon Cold Crank Simulator Type CL120 (CL12) -- 500mL

CL130 Paragon Cold Crank Simulator Type CL130 (CL13) -- 500mL

CL140 Paragon Cold Crank Simulator Type CL140 (CL14) -- 500mL

CL150 Paragon Cold Crank Simulator Type CL150 (CL15) -- 500mL

CL170 Paragon Cold Crank Simulator Type CL170 (CL17) -- 500mL

2162/16 Paragon Cone & Plate Viscosity Std. CRM / 6868 cSt (25.00°C)

CRM-DEGO Paragon CRM -- Density (Diesel) -- 0.832 g/mL @ 15°C

CRM-FAGO Paragon CRM -- Fatty Acid Methyl Ester (FAME) -- Diesel

CRMU-ADKR Paragon ISO Accredited CRM -- Acidity (Jet)

CRMU-DIGO Paragon ISO Accredited CRM -- Distillation (Diesel)

CRMU-DIGA Paragon ISO Accredited CRM -- Distillation (Gasoline)

CRMU-DIKR Paragon ISO Accredited CRM -- Distillation (Jet Fuel)

FP-COC-5 Paragon Secondary working reference standard / 259 °C / Min. Oil

FP-PMCC-2 Paragon Secondary working reference standard / 75,5 °C / Min. Oil

HVS03 Paragon Small Sample Viscosity 10.01cSt @ 40°C & 2.656cSt @ 100°C

HVS10 Paragon Small Sample Viscosity 1009cSt @ 40°C & 59.52cSt @ 100°C

HVS06 Paragon Small Sample Viscosity 101.0cSt @ 40°C & 11.80cSt @ 100°C

HVS15 Paragon Small Sample Viscosity 13014cSt @ 40°C & 373.1cSt @ 100°C

HVS07 Paragon Small Sample Viscosity 182.3cSt @ 40°C & 17.89cSt @ 100°C

HVS01 Paragon Small Sample Viscosity 2.885cSt @ 40°C & 1.184cSt @ 100°C

HVS12 Paragon Small Sample Viscosity 2100cSt @ 40°C & 95.45cSt @ 100°C

HVS16 Paragon Small Sample Viscosity 23398cSt @ 40°C & 604.2cSt @ 100°C

HVS04 Paragon Small Sample Viscosity 31.99cSt @ 40°C & 5.530cSt @ 100°C

HVS08 Paragon Small Sample Viscosity 312.1cSt @ 40°C & 26.33cSt @ 100°C

HVS13 Paragon Small Sample Viscosity 3421cSt @ 40°C & 157.9 @ 100°C

HVS02 Paragon Small Sample Viscosity 5.747cSt @ 40°C & 1.852cSt @ 100°C

HVS09 Paragon Small Sample Viscosity 528.5cSt @ 40°C & 26.33cSt @ 100°C

HVS05 Paragon Small Sample Viscosity 54.24cSt @ 40°C & 7.819cSt @ 100°C

HVS14 Paragon Small Sample Viscosity 6691cSt @ 40°C & 241.1cSt @ 100°C

VIS-CCS-8 Paragon Type CL14, CL19, CL22, CL25, CL28, CL32, CL48, CL74. (Set)

N10 Paragon Type N10 / 20.72cSt @ 20°C / 500mL

N1000 Paragon Type N1000 / 4427cSt @ 20°C / 500mL

N10200 Paragon Type N10200 -- 58149cSt @ 20°C -- 500mL

N14 Paragon Type N14 -- 30.30cSt @ 20°C -- 500mL

N140 Paragon Type N140 -- 408.7cSt @ 20°C -- 500mL

N1400 Paragon Type N1400 -- 5806cSt @ 20°C -- 500mL

N18000 Paragon Type N18000 -- 106285cSt @ 20°C -- 500mL

N2500 Paragon Type N2500 -- 11431cSt @ 20°C -- 500mL

N44 Paragon Type N44 -- 111.2cSt @ 20°C -- 500mL

S20 Paragon Type S20 / 42.78cSt @ 20°C / 500mL

S200 Paragon Type S200 -- 649.1cSt @ 20°C -- 500mL

S2000 Paragon Type S2000 -- 8089cSt @ 20°C -- 500mL

S20S Paragon Type S20S -- 42.87cSt @ 20°C -- 500mL

S30000 Paragon Type S30000 / 128676cSt @ 20°C / 500mL

S60 Paragon Type S60 / 158.8cSt @ 20°C / 500mL

S600 Paragon Type S600 -- 2219cSt @ 20°C -- 500mL

99857-0 Paragon Verification Mat. -- Kerosene & Naphthalene's / 1.35-2.4 %

JF1-H Paragon Viscosity Low Temperature Type JF1-H -- 500mL

JF1-L Paragon Viscosity Low Temperature Type JF1-L -- 500mL

N105B Paragon Viscosity Low Temperature Type N105B / 500mL

N115B Paragon Viscosity Low Temperature Type N115B / 500mL

N1400B Paragon Viscosity Low Temperature Type N1400B / 500mL

N14B Paragon Viscosity Low Temperature Type N14B -- 500mL

N480B Paragon Viscosity Low Temperature Type N480B / 500mL

VIS-RT1K-600 Paragon Viscosity Rotational Type RT1000 / 600mL

VIS-RT5K-600 Paragon Viscosity Rotational Type RT5000 / 600mL

There are no consumables available for this product.